WPS “Oxy-Mag” systems use a Tri-Pole magnetic field featuring a strong neodymium
magnetic module. The water starts its journey through a multi-media
bed including coconut shell granular activated carbon, clinoptilolite, garnet,
and quartz for highly refined and polished water. The water then enters the
pressure reduction chamber which slows the velocity allowing for enhanced
magnetic field contact time as the water envelopes the magnetic module.
Magnetic water conditioning has a long history and a form of magnetic water
treatment was patented in 1894 (US Patent No. 531,183) by John T. Harris.
The Activated carbon is used to remove impurities including organic contaminants,
chlorine, chloramines, pesticides, color and much more. One pound of
GAC has a surface area equivalent to six football fields. Impurities are held
within the carbon’s internal pore structure by electrostatic attraction or chemisorption.
Catalytic GAC is also available and offers faster rates for the removal
of chloramines.
-
Description:
- Certified to NSF/ANSI 44, NSF/ANSI/CAN 61, and 372.
- Solid state microprocessor with easy access front panel settings.
- Three modes of operation: meter immediate, meter delayed, or time clock delayed.
- Double backwash feature for optimum regeneration cleaning ability and efficiency.
- Capable of 36 pre-programmed regeneration cycles based on control valve setting.
- Days override feature from 1 to 28 days.
- Backwash and brining ability to 21” diameter tanks.
- Downflow/upflow regeneration.
- Stores system configuration and operation data in nonvolatile memory.
- Coin Cell Lithium battery backup with an 8-hour carry over.
- Level VI 15-volt output DC power supply for safe and easy installation.
- Optimum service and backwash rates through control valve design.
- Pre or Post treated water regenerant refill.
- Reliable and proven DC drive.
- One-piece expanding seal spacer stack assembly.
- Linearly reciprocating piston operation.
-
Specifications:
- Inlet/Outlet Fittings: ¾" to 1.5” NPS.
- Cycles: Up to 6.
- Valve Material: Fiber Reinforced Composite.
- Regeneration: Downflow/Upflow.
-
Flow Rates:
- Service @15 psi drop (includes bypass and meter): 27 gpm.
- Backwash @ 25 psi drop (includes bypass): 27 gpm.
- Cv Service: 7.0.
- Cv Backwash: 5.4.
-
Operating Pressures: 20 psi – 125 psi.
-
Operating Temperatures: 40º – 110º F.
-
Meter Accuracy: ± 5%.
-
Flow Rate Range: 0.25 – 27 gpm.
-
Gallon Range: 20 – 50,000 gallons.
-
Totalizer: 1,000 - 9,999,000 gallons.
-
Dimensions & Weight:
- Distributor Pilot: 1.050" OD Pipe (¾" NPS).
- Drain Line: ¾” or 1” NPT.
- Brine Line: 3/8” or ½” OD Poly Tube.
- Mounting Base: 2 ½” - 8 NPSM.
- Height From Top Of Tank: 7 3/8”.
- Weight: 4.5 lbs.
-
Electrical Specifications (Power Supply):
- U.S.: 100VAC to 120VAC, Supply Frequency: 50/60 Hz, Output Voltage: 15VDC, Output Current: 500 mA.
-
Tank Applications:
- Water Softener: 6” – 21” diameter.
- Water Filter: 6” – 21” diameter.
Activated carbon is commonly used to adsorb taste, odor and natural/synthetic organic compounds.
"Oxy-Mag" neodymium magnetic module for scale reduction. Patented in 1894 (US Patent No. 531183) by John T. Harris.
Clinoptilolite and its sodium reduces sediment down to the 3-5 micron range also reduces ammonium ions and radioactive cesium, strontiumPb2+, Ni2+, Cd2+, Ba2+ from water..
Garnet with its high specific gravity of 4.0 forms the lower fine grain layer, its 0.3 mm effective size can filter down to the 10-20 micron range. Garnet support beds to allow faster back flushing.
Quartz media for enhanced distribution and cleaner water.
Attention! This product requires Professional Installation. This product should be installed/connected by a licensed contractor for correct installation and the best results.
Warranty:
If bought Online and NOT installed by Water Purification Systems Inc.
This product is covered by manufacture warranty, 1 Year Parts ONLY.
If bought from Water Purification Systems Inc. and installed by Water Purification Systems Inc.
This product is covered by Water Purification Systems Inc., 5 Years Parts and Labor.
Reviews
There are no reviews yet.